home *** CD-ROM | disk | FTP | other *** search
-
- "SOUNDS LIKE A..." INSTALLATION INSTRUCTIONS
- The SLA program files are compressed into the two files SLA10.001 and
- SLA10.002. These files will be found on 2 disks in the 5 1/4" version,
- or may be on a single disk if using 3 1/2" disks. You MUST run the
- INSTALL.BAT file in order to install SLA correctly! At the DOS prompt,
- type the following commands, pressing ENTER after each command. The
- information in ()'s should not be typed.
-
- MD \SLA (any directory name)
- CD \SLA
- A: (change to floppy disk)
- (Insert disk1) INSTALL A C (do not add : )
-
- For the last 2 commands, you may replace the A, C, with any appropriate
- drives. For the INSTALL command, the first drive should be the source
- drive, the second drive should be the destination, i.e. the above command
- would install from a floppy in drive A to the hard drive C.
-
- The INSTALL batch file will prompt you to insert DISK 2. If you are
- installing from a single disk, leave the same disk in and press ENTER.
-
- Please take a few minutes to read the brief program documentation found in
- the file SLA.DOC. This file may be printed by typing: COPY SLA.DOC PRN
-